3D Printing

Toyota Supra MK4 Silhouette Wall Decor Artwork For Home Or Office, STL Files

Posted by Marlon Lopez on
3d printed wall art silhouette of a Toyota Supra MK4 in frontal view.

A frontal view of the Toyota Supra MK4 in silhouette style for your wall decor. Every angle of this car is legendary in its design and deserves a silhouetted artwork, but for now, I give you the front view. The downloadable STL file can be 3d printed as an intact piece of art, or split into two parts to accommodate smaller bed size 3d printers.

Measurements for the Toyota Supra MK4 front view wall art. The intact version of the STL file measures X: 395.66mm, Y: 245.3mm and Z: 3mm.

For this artwork, I reworked an earlier Supra MK4 design with delicate lines and re-designed it to be structurally stronger. I took into account the size and weight of the design so that it can be wall mounted without breaking or warping. The bottom portion of the artwork was designed thick; to hold the overall weight of the design. Wherever possible, the design was made thinner to bring out more of the details in the artwork. In the example shown above, I used a .8mm nozzle and .3mm resolution to 3d print both the Supra artwork and wall mounting pegs.

Once 3d printed, the Supra MK4 artwork can be wall mounted using the included STL files of my angled wall mount pegs. The pegs make it easy to mount and unmount the artwork from the wall, and are angled to display the artwork properly. The pegs will also need to be 3d printed, then glued to the back of the artwork (see photo below).

3d printed pegs can be attached to the artwork with hot glue or CA (Cyanoacrylates) adhesives.
More photos of this project:

3D Design Format: STL

3D Model Size: 395.6mm x 245.3mm x 3mm

3D Model Size Split: 197.85mm x 245.3mm x 3mm

Recommended Nozzle Size: .8mm

Supports Needed: Not For Artwork, Only For Wall Mounting Pegs

This 3D STL file can be purchased and downloaded from:

If you found this useful and want to show your
appreciation of my work, consider:

Related posts:

About Marlon Lopez

I enjoy collaborating with artist, photographers, designers and gear heads. I find inspiration while driving the most perfect driving roads imaginable in California. I have experience in print design, web design, advertising, corporate identity, brochures, printed directories, direct mail, interactive design, and 3D printing. My design solutions emerge from a comprehensive design process, and a understanding of my clients needs.

Share and Enjoy !

Leave a Reply

Your email address will not be published.

CAPTCHA

*