3D Printing

STL To Wall Mount Flexible Ventilation Air Hose, Exhaust Ducting

Posted by Marlon Lopez on
Ventilation air hose wall mount for 4 inch ducting, using 3d printed parts.

A wall mount design for your ventilation or exhaust hoses. The 3d printed part will securely hold a 4 inch flexible ducting hose in place. These flexible hoses tend to slide around in an accordion like fashion. When you extend them, they naturally want to compress themselves back to their original state. When you install them on a wall, you will fight against that force that is pulling the hose back to a compact form. This 3d printed part will prevent the hose from deliberately sliding off. The 3d printed part essentially “grips” and holds the hose in place, even if the hose is trying to pull it in the direction where it has the most weight.

3d printed wall mount for flexible 4 inch ducting, holding the hose above a door.

The 3d printed ducting wall mount requires two small screws per brace; to secure it to a wall. It is a lightweight design that doesn’t need filament supports when 3d printing. With the STL file, you can print out as many hose mounts as you need. Enjoy!

Required hardware to wall mount the ventilation hose, using a 3d printed brace.
More info on this project:

3D Design Format: STL

3D Model Size: 27mm x 119.9mm x 92.09mm

Recommended Resolution: .4mm

Recommended Nozzle Size: .8mm

Supports Needed: Yes

This 3D STL file can be purchased and downloaded from:

If you found this useful and want to show your
appreciation of my work, consider:

Related posts:

About Marlon Lopez

I enjoy collaborating with artist, photographers, designers and gear heads. I find inspiration while driving the most perfect driving roads imaginable in California. I have experience in print design, web design, advertising, corporate identity, brochures, printed directories, direct mail, interactive design, and 3D printing. My design solutions emerge from a comprehensive design process, and a understanding of my clients needs.

Share and Enjoy !

Leave a Reply

Your email address will not be published.

CAPTCHA

*